Steps to follow to repair your windshield yourself

If your car’s windshield has a chip, you may want to have it repaired as soon as possible. If ignored, this little chip can expand and increase your chances of replacing your car’s windshield. Once the first layer of the windshield is broken, the damage can spread. If you want to save money in the long run, we suggest you get your glass repaired as soon as possible. You can do it yourself or ask a professional for help. You can purchase windshield repair kits at a nearby auto parts store if you want to go DIY. Below are some of the tips that can help you do the repair yourself.

one. For DIY work, you need the following:

  • Shaving blades
  • plastic curb tab
  • pit filling
  • repair resin
  • injector and bridge
  • A mirror to place inside.
  • A Dremel tool

2. Start the repair process

First of all, you need to prepare the windshield for repair. You can use an alcohol pad to clean the area. Your next step is to hook the mirror onto the inside of the glass. It should be centered on the chip that needs to be repaired. This will help you monitor the form from different aspects.

3. Seal the chip

You may want to center the desired tool on the chip. Basically, you need to seal over the chipped area.

4: resin drop

Once you’ve sealed the chip, your next step is to drop a couple of drops of resin into the injector area.

5: inject the chip

You can use the injector to insert the resin into the chip. Once you’re done, you may want to let it sit for at least 5 minutes. If your car is in direct sunlight, you may want to keep the area covered. This is important for the resin to cure properly. After 10 minutes, you can take off from the bridge.

6: Fill the missing glass

Now, you are almost done with the repair. Your finishing move is to fill in the small holes in the chipped area. This is the area where you may find that some glass is missing. For a smooth finish, following this step is of the utmost importance. You can use your pet stuffing for this purpose. Once you’ve filled in the area, you may want to wait a couple of minutes for it to fully heal.

7: Scrape excess padding from the pit

You can use a razor blade to scrape off excess filler from hole. Apart from this, you can use nail polish to make sure that the area shines again.

In a nutshell, you can follow these steps if you want to repair your car windshield yourself. However, if you haven’t done any type of windshield repair work before, we suggest you take your car to a professional. After all, you don’t want to end up causing more damage to your vehicle.

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *