Do you know what is one of the most frequent problems in a bathroom? A lot of people tend to think of things like the toilet, but the real culprit is usually a towel rack. The towel rails can come loose, break a piece, have the fittings come off, etc., etc. It can seem like every time you turn around, some part of the towel rack is slipping or just not working right. Well, the problem may not be the towel rail. It may be that you don’t have the right type of bar for the job you are asking it to do.
All bathroom hardware pieces come with certain capabilities. They all generally have weight capacities. What this means is the amount of weight they can carry or the pressure they can take. When it comes to these bars, there are two ways this adds up. First is the weight of the towel itself. For hand towels this is negligible. But for heavy bath towels, high-end towels can cost a couple of pounds each. Now add to this the pressure and weight you’ll be putting on the bar every time you pull on one of those towels.
Once you realize the weight stresses you’re putting on the bars, you can understand why it’s now more important to understand the weight capacities of towel bars before purchasing and installing them.
The good news is that there are bars out there that can take just about any kind of pressure you want to put on them. You just need to make sure that you have the right style for your home.
If you’re not going to use too much pressure, you could use just about anything on the market. From single bolt towel rails to pretty, delicate and decorative bars, enjoy choosing something to suit your style. But if you have a bathroom that is used frequently, by guests, or more importantly, by children, you want to make sure that any towel rack you buy can handle the amount of stress you’re going to be under.
In general, you’ll want to choose one of three types of towel racks. These are bolt-on towel rails, over-the-door towel rails or removable bars. Screw-in towel rails are the type that usually have 2-4 screws to fix them to the wall. If you’re looking for something really sturdy, you’ll want to not just attach them to any part of the wall, but look for studs in the wall to attach them together to give them a little extra support against pressure. you’re going to be put down. Over the door bars can handle a lot of stress. The reason for this is that they have the full weight of the door working in their favor. In the case of these towel rails, a pair of what are usually metal clips go over the top of the door. These clips have rods that run down the side and hold the towel rack to the back of the door. Finally, removable towel rails may not always withstand the pressure applied to them, but they won’t cause any major damage to the wall if knocked over. These are towel bars that are held in place with a flexible, removable adhesive. You can stick them on the wall and they will take a lot of pressure, but if the pressure is too much, they will come off. The good news is that they can be easily reattached without anything worsening the wear.
